 | NYLON TUBING – METRIC SIZES
Nylon tubing is suited for use as oil lines, fuel lines, petrol tank breather pipes, greasing sheaths, pneumatic controls, bleed lines and lubrication lines. It has a temperature range of –40ºC +80ºC (+110ºC intermittent). Metric dimensions conform to BS5409. OD sizes 4, 5, 6, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 20, 22, 25 & 28mm. Colours: Natural, Black, Blue, Red, Green, Yellow, Orange, Brown & Grey. Available in Semi-rigid or Flexible grades. Nylon Tube - METRIC FLEXIBLE Nylon Tube - METRIC SEMI-RIGID
NYLON TUBING – IMPERIAL SIZES
As above. OD sizes 1/8”, 5/32”, 3/16”, ¼”, 5/16”, 3/8”, ½”, 5/8” & 1”
Available in Semi-rigid or Flexible grades. Nylon Tube - IMPERIAL FLEXIBLE Nylon Tube - IMPERIAL SEMI-RIGID |  | SUPERFLEX NYLON TUBING
Superflex nylon tubing will remain flexible at very low temperatures and has high impact resistance. Its improved flexibility make it ideal for instrument lines, flexible paint and solvent spray tube and for constructing control circuits were better flexibility means less tube is required giving a neater finish Superflex Nylon Tubing |  | NYLON PRE-FORMED AIRLINE COILS
These offer a self retracting airline which is exceptionally lightweight and ideally suited for use with air tools. Available in working lengths of 2.5, 5, 10 & 15m. Tube OD 6, 8, 10 & 12mm. Complete with fittings ¼”BSPT or 3/8”BSPT & spring guards. Colours: Blue & Red. Nylon Preformed Airline Coils |  | ARTICULATED VEHICLE BRAKE COILS
These are produced to S.M.M.T C2C spec & comply with NM7B and SAEJ844-3A. Supplied with ½” BSP Male end fittings.
Also, A.V.A.C DIN Coils using 12mm nylon tube made to DIN73378 & 74323.. Red for emergency trailer lines, Yellow for service trailer lines & Blue for auxiliary trailer lines. Articulated Vehicle Airbrake Coils |  | POLYURETHANE TUBING
Pneumatic polyurethane tubing is suited for use in fuel lines, pneumatic control systems and lubrication lines where the tube has to be bent tightly without restricting the flow such as in confined spaces. Available in OD sizes 4, 5, 6, 8, 10 & 12mm. Colours: Natural, Clear, Black, Red, Green & Yellow. Pneumatic Polyurethane Tube |  | POLYURETHANE PRE-FORMED AIRLINE COILS
polyurethane extension coils offer exceptional kink and abrasion resistance with superior flexibility making them ideally suited for use with air tools, robotic applications or confined spaces where a more compact coil is advantageous. Available in working lengths of 2, 4 & 6m. Tube OD 8, 10 & 12mm. Complete with fittings ¼”BSPT or 3/8”BSPT & spring guards. Colours: Blue & Red. Preformed Polyurethane Airline Coils |  | WELD SPATTER TUBE
Weld spatter tube is nylon tube with a T.P.R. cover which can be easily trimmed back to allow use with push-in fittings. The cover is flame retardant and self extinguishing making this ideal for robotics, welding equipment & heat sensitive locations. Nylon OD sizes: 6, 8, 10 & 12mm. Weld Spatter Nylon Tube |
 'DEKABON'/'SYNFLEX'/'MALUFORM' TUBE
A fully bonded polyethylene / aluminium tube designed for pneumatic control systems. The 'stayput' characteristics are easily formed by hand. Sizes: 6, 8, 10 & 12mm od & 1/4", 3/8" & 1/2"od. 'Dekabon' / 'Synflex' Tube DIN Specification nylon tube is available in long lengths on drums. Metric tubing manufactured to DIN 73378 & 74324 standards. Suitable for use in air brake, fuel and lube applications, instrumentation and secondary air systems. Sizes from 4mm od through to 18mm od. DIN Spec Nylon Tube 
|
Pneumatic Tube 
