For production, blending and pouring plants, with a concentrations up to 100%. The hose is usually connected with the common fittings for oils, like BS and Camlock.
Plutone BD100 is the first thermoplastic hose made from a special compound which can deliver Biodiesel at 100% concentration. Very good resistance to fuels, oils and chemicals. Hose for suction and delivery, suitable for a working pressure average of 10 Bar and a vacuum average of 9 mH2O.
The product is reinforced with a steel spiral and a high tenacity polyester yarn, completely smooth inside and outside to limit friction due to dragging and to ensure flow properties if compared with a vulcanized rubber hose, Plutone BD100 is lighter and easier to handle. By grounding the embedded coppered wire, the hose is electrically bonded according to TRB S 2153. The electrical resistance R ≤ 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). The hose is also in accordance to the international EN14214, which concerns Biodiesel production.
Conform to ATEX; EN 14214; TRB S 2153.
-30°C to 80°C
This product can be made "Electrically Bonded" by grounding the spiral
This product is part of the "Plutone" group of products, see the range here:
|Part||ID ⌀||OD ⌀||Weight||Bend Radius||WP||Vacuum||Coil Length||Volume|
Please be advised; specifications assume standard room temperature unless otherwise specified. All data presented here is intended as a guide only; we are not responsible for errors or discrepancies in the specifications.
Please click here for full terms and conditions.
Please contact our sales office on 01636816612 for further details!